Posted in Little Black (French) Jacket, sewing

Following Coco’s Advice: Making the inside of the Little French Jacket as beautiful as the outside

according-to-cocoCoco Chanel knew a thing or two about elegance. Most of us have an innate sense of what it means to be elegant (whether or not we aspire to it – I do), but if pressed to define the term—well, that’s a bit more elusive. Since one of my objectives in paying homage to Chanel’s aesthetic by reproducing a few pieces inspired by her approach to design is to create elegantly wearable pieces, I thought it might be informative to look it up.

Most definitions of elegant use words like, graceful, stylish tasteful, luxurious, sophisticated and chic, all of which I like the sound of, but my favourite definition is this: “…someone or something luxurious in a restrained manner or something that is very well-thought through yet simple.”[1] Oh how I wish every piece of clothing in my closet held to this standard. And how I aspire to be elegant as I age. Anyway, what does this have to do with my current sewing project? Well, lots.

As I painstakingly complete the internal workings of the Little French Jacket, I’m always bearing in mind that Chanel truly believed that the inside of finished clothing (she wasn’t just referring to the more esoteric internal beauty of individuals if that was even a part of her thought process), ought to be as beautiful as the outside. And that means that taking particular care to get it right even in the parts that no one will see is important. Whenever I wear my first LFJ it makes me feel elegant just to know that the inside is beautifully finished. It doesn’t hurt that this type of construction is sublimely comfortable either (if you choose your fabrics carefully).

IMG_1131
The inside of my first LFJ.

 

I’ve stabilized all of the edges of the bouclé by hand-sewing twill tape as I did before. Many expert sewers who teach about this type of construction will tell you to put selvedge from silk organza. That’s terrific, but I felt that the edges of this bouclé which has quite a bit of give to it and is floppy, required a bit more stability. Now that I have the basic construction completed, I know that I was right in my selection. You can’t be too wedded to rules, I think.

Quilting the lining to the jacket body pieces was a bit trickier this time around. The last time I made one of these jackets I had a kind of plaid design in the tweed which gave me straight lines on the outside of the jacket to follow when machine quilting. Since it does have to be quilted from the outside, it occurred to me that this might be tricky. To be fair, it would be tricky even on the inside since the lining has no lines either. So, I decided to take a page out of Claire Schaeffer’s instructions and thread baste the pieces together as well as adding a straight line of basting down the centre of each piece to follow for the first line of quilting on each piece then use that line as the basis for straight lines for the rest of the stitching (always using a 3.0 mm stitch length and a walking foot).

img_1528
Basting the lining to the fabric – and using a ruler to get the centre line straight. It will guide the first line of quilting done by machine from the outside.

 

After quilting the pieces, I started on the side and shoulder seams. The pressing of the seams is critical. In my view, pressing (or lack thereof) is one of the sure signs of an amateurish, home-made piece of clothing (notwithstanding some of the new designs on runways that look like they were done in old home economics sewing classes without benefit of a steam iron). Pressing technique is so important.

I now know to press the seam flat in its closed position before attempting to press it open. I used to do that all the time. I also know to then press with only the tip of the iron on the outside to finish. So three passes at the ironing board.

I also know not to trim the seam before pressing. No wonder it was so difficult to open them! Anyway, I also now know to use small scissors to trim the seams after – I have so much more control this way.

img_1531
I used grey thread in the spool and black in the bobbin so that the quilting would blend in to the different colours of the outside versus the inside. I also knew to leave very long threads at the end this time since they have to be pulled inside and knotted – backstitching here!

 

The next step is the sleeves which are always a treat since there are so many layers that have to be carefully put in their correct location. I never have trouble setting in sleeves, but making sure that I haven’t caught up a piece of lining where lining ought not to be caught is the real challenge for me. But once they’re completed and the lining is hand-sewn inside, it looks like a real jacket whose simple exterior belies the work done on the inside. I love knowing that!

I’m very happy with the progress so far. Christmas is just about upon us and I do hope to have the jacket ready for New Year’s Eve. Here’s hoping!

[1] http://www.yourdictionary.com/elegant#IoW3DtTDrD0Tklhy.99

Advertisements

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s