Posted in Couture Sewing, Little Black (French) Jacket, sewing

A muslin/toile for my new Little French Jacket: Marking for perfect fit

coco quoteCoco Chanel is often quoted as having said, “Dress shabbily and they remember the dress; dress impeccably and they remember the woman.” And nothing says impeccable dressing to me more than perfect fit. Oh how I strive for perfect fit (as anyone who has read previous posts on this journey with me will know!). As I advance down the road toward Little French Jacket #3, I am faced squarely with fitting a new design rather than reusing an already fitted one. Of course this begins with the muslin.

When last we spoke I had done a preliminary pattern fitting, tweaked a few known problems, and then began cutting out the muslin to create my first test jacket – and with any luck and a few more tweaks, it will be the only one I’ll need.

In the Spring 2013 special fitting issue of Threads magazine Susan Khalje begins her article on creating a muslin by saying, “Muslin may be an inexpensive fabric, but a muslin test garment is worth its weight in gold.” And I wouldn’t even consider cutting into that expensive bouclé or that even more expensive silk charmeuse for the jacket lining before getting as close to a perfect fit for the pattern as I could possibly get. This is especially important in the case of these jackets because of the nature of the fabrics themselves. Both bouclé and silk charmeuse fray appallingly and the less they are manipulated the better. This means that there should be no seam ripping whatsoever. The only way to avoid redoing any seam in my view is to be absolutely certain that the pattern fits then baste everything before sewing. We’ll see how that goes.

Anyway, I now have my muslin fabric cut out and am ready to mark it. I am going to be marking and working with seam lines as I mentioned in my last post, rather than seam allowance edges, so the muslin pieces are pretty roughly cut out. Now I have to transfer all seam lines, grain lines and other markings onto the right side of the muslin pieces. The right side you ask? Well, this is what I asked after a lifetime of tailor’s tacks in good fabrics (I’ll get to those as well – wait and see) and piddly little pieces of carbon tracing paper sandwiched between two pieces of fabric to mark on the wrong side. I learned that approach in long-ago home ec. classes! With the couture approach to muslin creation, however, I need the markings on the right side so I can see them when I do the fitting in due course. Won’t I need some marks on the inside for sewing – well, yes, but I’ll get to that.

I’m using large sheets of dressmaker’s waxed marking paper that I bought online from Susan Khalje’s web site. When I started using it I thought, “Where have you been all my life?” I think each sheet (it comes in a tube of 4 sheets of different colours) measures about 26 inches X 39 inches.

IMG_2015
The sheets of the heavily waxed paper are enormous and wonderful to work with. But they do cause a bit of hand staining! (It comes off easily!)

I roll out the red sheet (I like red for my first pass on muslins) on my cutting board and hold it in place with random things on the four edges that will otherwise curl unmercifully. I have a tape dispenser on one, a pair of shears on another – well, you get the idea.

I place my first cut-out muslin piece on the tracing paper and just begin tracing all the marks with my tracing wheel. When I need to move the piece to be closer to me, I just move it. When I need to turn it, I just turn it. There is no rearranging of carbon paper etc. I’m in heaven. I mark everything in sight. Grain lines for sure, seam lines, darts, circles, notches, waistline, bicep line, high figure point etc. When I have all of this on one piece and I have carefully checked to ensure I haven’t missed any markings, I remove the tissue paper pattern, re-pin the two layers together and just turn it over. I use the markings on this side to mark the other side. Brilliant! I then take a red pen and label each piece: centre front, side front, upper sleeve etc. I repeat this process with every single piece. Because I’m a bit OCD about this process, I actually note which is the right side and which is the left for each piece and mark this as well.

IMG_1154
I’ve marked from one side, removed the tissue pattern, re-pinned and turned the piece over to use the initial markings to mark the other side. 

I need to say a few things about this pattern (Vogue 8804). It is Claire Shaeffer’s design for these LFJ’s and on the pattern pieces she has provided markings for the quilting lines. When made a LFJ before, I always made my own decisions regarding the location and spacing of the quilting lines based largely on the pattern woven into the fabric itself. However, I do note that since this one will have buttons and buttonholes, and the front will be underlined with silk organza which she specifically indicates should be quilted directly to the fashion fabric rather than doing this line through the lining, I do mark those quilting lines on the front pieces. I will leave out the back markings though, and make a decision and measure them when I get to the quilting part.Vogue 8804 pattern front

So I now have all the pieces marked on the right side, but I’ll be putting right sides together to sew up the toile, so how in the world do I get the marks I need on the wrong side? Thread tracing to the rescue.

I put all the tissue paper pattern pieces back in the envelope: I shouldn’t need those ever again as long as I live if I get this right. Then I take the muslin pieces to the machine. I thread it with red thread. (Remember, I like red for my first pass at a muslin then I know which marking I’m looking at.)

Using a 3.5 mm stitch length (it does go faster this way and there is less puckering), I sew along any line I will need to sew. This means I don’t thread-trace grain lines, waist markings etc. I don’t back-tack at all and I sew to the end of each line, stop, cut the thread, then sew the next one so that I have very clear transections of the seam lines. This should make it easier to match up the corners.

 

When this process is complete, I have a perfect set of wrong side sewing markings. I take all the pieces to the ironing board and give them a good steam press. I’m ready to sew the muslin together.

Using a 3.5 mm stitch length and dark grey thread to differentiate the stitching line from the thread tracing line, I whip it together. Well I whip it and carefully prepare and set in the sleeves to be honest. Once it’s complete, with great trepidation I put it on, approach the mirror, and hope that it comes close to fitting.

Advertisements

2 thoughts on “A muslin/toile for my new Little French Jacket: Marking for perfect fit

  1. Great start! You are so right about getting the muslin to fit perfectly before even thinking about cutting into your fabric. I tape my large sheets of carbon to tag board, insert grommets at the top and hang them. That’s my solution to keeping the carbon from rolling up. I’m looking forward to the next step.

    Like

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s